Buy it Again
Convenience Valet Booster Cable - Each
Booster Cables, 8 Foot
12 gauge. No-tangle, all copper. Color coded clamps. Made in China.
Warning Contains: When near jump-start area wear safety glasses and do not smoke. Explosive gasses contained in batteries. Avoid serious danger by refraining from smoking and by keeping any flames or sparks away from charging area. Wear eye protection. Do not lean over batteries when they are being charged. Consult your owners manual for pertinent information. California Proposition 65 Warning: This product and packaging contains chemicals, including lead, known to the state of California to cause (cancer and) birth defects or other reproductive harm. Wash hands after handling.
Directions 1. Battery vent caps must be tight and level. Make sure vehicles are not touching. Make sure both electrical systems are the same voltage. If battery fluid is frozen Do Not Jump Start. 2. Clamp positive (+) end of the jumper cable to the dead battery's positive (+) terminal which is wired to the starter or solenoid. Make sure the positive cable clamps Do Not touch any other metal than the battery terminals during the hook-up. 3. Clamp the opposite end of positive (+) to the positive (+) terminal of the live battery. 4. Clamp the negative (-) cable end to the negative (-) terminal to the live battery. 5. Clamp opposite end of the negative (-) cable to the metal area on the engine block that is away from battery, carburetor, fuel line, or any moveable parts. Do Not clamp to negative (-) post of dead battery. 6. Move away from vehicles and start the car with the live battery. Now start the stalled vehicle. 7. Disconnect cables from both vehicles in reverse order with the cable connected t
About the Producer Convenience Valet
Product details/images for convenience only. Consult Product label for the most current and accurate information. We assume no liability for any inaccuracies/misstatements about Products listed on our website/app.